Precision Thickness Gages
UPG-07 Color

UPG-07 Color

 Danatronics UPG-07 Color series comes in 4 models ranging from our UPG-07C to the fully loaded UPG-07DLCW that includes B-Scan, a 100k reading datalogger and a live Waveform (A-Scan)

 Our UPG-07 Color Wave series is the ideal unit to non-destructively test the wall thickness for manufactured parts requiring unprecedented accuracy and resolution. The UPG-07 Color series utilizes single element transducers and offers a 30 Mhz, square wave pulser, .0001” or 1 micron resolution with the ability to store and re-call 30 unique applications. So if you are measuring light bulbs, plastic bottles, golf clubs, coil steel, thin aluminum, aircraft parts and even pure gold bars, the UPG-07 Color Wave series is the right choice.
REQUEST A QUOTE
Features:
  • .0001" Resolution
  • Live color A-Scan
  • Vibration and color change on alarm
  • Stored and recall of setups
  • 30 Mhz. bandwidth
  • Squarewave pulser
  • Zoom auto tracking to center waveform
  • 100 K reading datalogger
  • Multiple modes for challenging applications
  • Gain, range and blanking adjustments
  • Available in multiple models

Typical Applications:
  • Coil Steel
  • Castings
  • Rubber...Tires, Conveyor Belts
  • Fiberglass...Boat Hulls
  • Gel Coating
  • Plastics...Bottles, Toys, Tubing
  • Ceramics
  • Titanium...Golf Club Heads
  • Brass
  • Aluminum
  • Glass
REQUEST A QUOTE
 Our UPG-07 Color Wave series is the ideal unit to non-destructively test the wall thickness for manufactured parts requiring unprecedented accuracy and resolution. The UPG-07 Color series utilizes single element transducers and offers a 30 Mhz, square wave pulser, .0001” or 1 micron resolution with the ability to store and re-call 30 unique applications. So if you are measuring lightbulbs, plastic bottles, golf clubs, coil steel, thin aluminum, aircraft parts and even pure gold bars, the UPG-07 Color Wave series is the right choice.

UPG-07C
Hand-Held Digital Ultrasonic thickness gage with Color Display for thickness only including: Plastic Carrying Case, 2 Oz. bottle of couplant (C-02G), 2 AA batteries, a transducer 10 Mhz. or less (please specify) , lemo to mircrodot cable 6' (LM-06)
UPG-07C


UPG-07CW
Hand-Held Digital Ultrasonic thickness gage with Color Display with Live Waveform including: Plastic Carrying Case, 2 Oz. bottle of couplant (C-02G), 2 AA batteries, a transducer 10 Mhz. or less (please specify) , lemo to mircrodot cable 6' (LM-06), gain, blanking adjus. Note: this model does not include the Datalogger.
UPG-07CW


UPG-07DLC
Includes all of the features of the UPG-07C plus 100,000 thickness readings via internal Datalogger, B-scan, protective pouch (PP-09), USB cable and Data XL interface program to export saved readings to p.c. (excel)
UPG-07DLC


UPG-07DLCW
Includes all the Features of the UPG-07CW plus 100,000 reading datalogger with export to excel, non-encoded B-scan, a Live Waveform to adjust gain, range, blanking, rectification. This model (Waveform) is highly recommended when setting up on difficult applications.
UPG-07DLCW
REQUEST A QUOTE
Size: 5" (127 mm) (L) x 3" (76.2 mm) (W) x 1.25" (31.75 mm) (H)

Weight: 8 OZ (.23 kg)

Thickness range:
0.004 - 20 inches (0.10 mm - 508 mm), depending on material, temperature and transducer selection

Material velocity calibration range: 0.200-0.7362 in/μsec. (0.508-18.699 mm/μsec.)

Temperature:
Gage Operating: -4° F to 122° F (-20° C to 50° C)

Surface temperature of material: Depending on probe used, from -5° F to 1000° F (-20° C to 537° C)

Battery life: Color display up to 10 hours (8 hours with backlight on) Monochrome up to 20 hours (8 hours with backlight on)

Battery type:
2 "AA" Alkaline

Display: Color 220 X 170 Graphics Color TFT with Live Color Waveform or Monochrome 64 X 128 Graphic Display

Information displays: LOS, min, max, large reading while displaying min at the same time, velocity, zero, calibration, units, freeze, unfreeze, % battery life remaining, gain - low, std, high, echo-to-echo symbol

Resolution: 0.0001" (0.001 mm), 0.001" (0.01mm)

Probe recognition:
Via pick list from a menu

Delay line zero measurement:
Auto at power up with listed numeric value Ideal for correcting delay line wear/curvature and for transducer acoustic drift at elevated temperatures

Stored Setups: Ability to store up to 30 custom set ups to retain valuable parameter settings such as sound velocity, gain, slope, range

Modes of Measurement:
Class 1, main bang to first back wall echo Class 2, Delay line (interface echo) to first back echo Class 3, Echo to Echo following an interface echo from a delay line or water column

Package: Custom, splash-proof, high-impact plastic with rubber, illuminating keypad for go/no-go testing

Bandwidth:
0.5-30 MHz (-3dB)

Pulser: Square Wave

Units: English/Metric/Microseconds

Languages: English, German, French, Spanish, Italian, Czech, Finnish, others

WaveForm: Live Color Waveform with Dynamic color change on alarm, large thickness reading. Live Monochrome waveform. See chart for included features by model.

Rectify: RF, Full Wave, Half Wave+, Half Wave -

Blanking: Main Bang Blank and Blank After First Received Echo

Gain: Auto or Manual in 1 dB steps for varying test conditions

Time Dependent Gain: adjust for slope and gain level as a function of time

B-Scan: Cross sectional representation of test piece

Measurement rate: 4/sec and 20/sec in fast mode

Differential Mode: Displays the difference from the actual thickness measurement and a user entered reference value

Alarms: Minimum/Maximum depth, vibration on alarm, beeps and display flashes as well as keypad illumination and dynamic waveform color change

Illuminating keypad: F1 = Red, F2 = Yellow and F3 = Green for easy, go/no-go testing

Ergonomics:
User selectable lefty or righty display changes via keypad (Patent Pending)

Backlight:
Light Emitting Diode, On/Off or Auto On based on valid readings or last key press

Shut off: Auto, time out (after 1-31 minutes user programmable after no reading, L.O.S. or no key press or “never”)

Scan mode:
Simultaneously Displays minimum or maximum thickness value at 20 measurements per second (ideal for tracking the minimum depth)

Protective Pouch:
Custom molded pouch with wrist strap for either left-handed or right-handed operators.

Shipping case: Hard plastic with high-density molded cut out for all accessories

Freeze mode: Freezes display (ideal for high temp. measurements)

Hold mode: Holds display to retain last thickness reading in reverse video display

Standard UPG-07 series:
Ultrasonic thickness gage, transducer (less than 10 Mhz with cable), couplant, transport case, data XL interface program.

Warranty:
Limited 2 year warranty on parts and labor MADE IN USA
REQUEST A QUOTE
UPG-07 Software Options are easy and convenient to upgrade in the field.   Danatronics gage upgrades are done directly from your gage's keypad and do not require the use of a computer.

The following are available upgrades for the UPG-07 Color Series

Datalogger
Comes standard with the UPG-07DLC and UPG-07DLCW

The datalogger stores 100,000 alpha numeric data points or thousands of waveforms (if gage is equipped with waveform option). Thickness values along with the i.d. information and all gage set up parameters are exported to Microsoft excel via the no-charged, Data XL interface program. Our Datalogger also interfaces with Ultrapipe.
Datalogger


Live Waveform
Comes standard with the UPG-07CW and UPG-07DLCW

The live waveform (A-scan) is used to verify reading stability. With the live waveform the operator can adjust gain, range, rectification and 2 forms of blanking to set the gage to ignore unwanted noise or mode converted echoes.
Live Waveform
REQUEST A QUOTE
 The following accessories are available for the UPG-07 series

Spring Loaded Holder
The spring loaded holder (SPH-718) is the ideal fixture to be used on small diameter applications such as tubing to prevent the probe from rocking. Shown above is the SPH-718 with the DK718 transducer inside. The probe can be rotated as well and the fixture has v-notches to assist in probe alignment.
Spring Loaded Holder


5 Step Test Block
We offer a 5 step test block, made of carbon steel with nickel plating engraved in both English and Metric values from .100’, .200”, .300”, .400”, .500” or 2.54mm, 5.05mm, 7.5mm, 10.0mm, 12.7mm (No certification is provided with these blocks but can be provide on special order for an additional fee)
5 Step Test Block


Protective Pouch
Custom protective pouch Part Number PP-09 for the EHC-09 Series.
Protective Pouch


UPG Transport Case
The UPG Transport Case is shown with common inclusions. (Pouch, Spare batteries and 5 step test block sold separately).
UPG Transport Case


Cables
Dual and single cables offered in 6 feet or other lengths upon special order. Shown left to right: DLM-06, DLM-06ACMP, LM-06
Cables


Couplants
We offer a variety of ultrasonic couplants from a standard gel in 2 Oz. or 12 Oz. options, to high temperature up to 1100 Degrees F. Contact us for more details.
Couplants


AC Power
With this hardware upgrade, the EHC-09 can be used with AC Power (please note, this is not a re-charging system). In other words, with this option, the EHC-09 can be either used with AC or battery mode.
AC Power


Footswitch
With this hardware option the operator can use a footswitch to save, freeze or send readings.
Footswitch
REQUEST A QUOTE
 Danatronics offers a wide variety of single element transducers from .5-20 Mhz , including, contact, delay lines including pencil probes and immersion transducers for special applications. Consult Danatronics or one of our authorized representative for the proper use and recommendation for your application.

For complete list including specifications please see our transducer chart

Single Element Contact Transducers
Danatronics single element transducers are stocked in a wide variety of frequencies and diameters, from 0.5mHz to 10mHz. All single element probes come standard with microdot connectors
Single Element Contact Transducers


Delay Line Transducers
Danatronics delay line transducer are available in 5, 10 and 20 mHZ options.
Delay Line Transducers


Spring Loaded Holder
Available for DLK525 and DLK-1025

Danatronics Spring Loaded Holder has dual v-notches for small diameter pipes and tubes to prevent probe “rocking”
Spring Loaded Holder