Flaw Detectors
ECHO PRO

ECHO PRO

 

 Danatronics ECHO PRO is our latest portable ultrasonic flaw detector. Designed with more than 70 years of digital ultrasonic flaw detection experience and always with our users in mind; you will be amazed at the speed and ease of use of its operations.

The ECHO PRO comes standard with many common software features such as a powerful datalogger with export of thickness readings to Excel, 2 gates, AWS, API 5UE, DAC, single hand and touch screen operation along with a powerful 600 Volt pulser and continuous 8-10 hour battery operation. Advanced features include damping, digital filters, analog and alarm outputs, wifi and Bluetooth. Optional Features include interface gate, floating and tracking gates, extended range, and back echo attenuator.

ECHO PRO can handle your most challenging ultrasonic inspections while being very simple to operate.
REQUEST A QUOTE
Features:
  • Bright, sunlight readable 7” Wide VGA touch screen display
  • More than 8 hour battery life
  • Standard features include datalogging, 2 gages, DAC, AWS, B-scan, Wi-Fi, Bluetooth, API-5Ue
  • Advanced features include extended range, TVG, Back ECHO Attenuation, Interface Gate, Damping and Energy
  • Intuitive user interface combining touchscreen or keypad
  • Custom packaging with rubber bumpers, hand strap, neck harness, variable angle hinge/stand and magnetic pipe stand
  • Change color and vibrate on alarm
  • Adjust gain, gates, delay and range from touch screen

Typical Applications:
  • Weld inspection
  • Delaminations
  • Porosity
  • Disbonds
  • Forgings
  • Castings
  • Refining
  • Power generation
  • Oil and gas
  • Pipeline inspection
  • Tank inspection
  • Thickness surveys
  • Inspection companies
REQUEST A QUOTE
ECHO PRO
The ECHO PRO is a Digital Ultrasonic flaw detector with 7” color sunlight readable touch screen display including: 2 independent gates, DAC, AWS software, datalogger with B-Scan, Bluetooth, Wifi, enclosure includes protective rubber corners with built in stand and padded hand strap, microSD card, rechargeable Li-ion battery, AC adapter with power cord, USB-C cable, plastic carrying case, couplant, Data XL interface program to export saved readings to p.c. (Microsoft Excel), ASTM E317-15 calibration certificate
ECHO PRO
REQUEST A QUOTE
 

Specifications ECHO PRO

General
Size: 9.9” x 6.16” x 2.50” (252 mm x 157 mm x 64 mm)
Weight: 3.6 lbs (1.63 kg) with internal rechargeable battery. 2.6 lbs (1.18 kg) without battery
Operating Temperature: -4 to 122F (-20 to 50C)
Enclosure: Custom case with rubber over mold and padded hand strap, built in stand with variable angle, ¼-20 connector for magnetic pipe stand and 4 point chest harness optional
Battery Life: 8-10 hours
Battery Type: 7.2V, 13.6AHr rechargeable lithium-ion
Battery storage Temperature: 32 °F to 122 °F (0 °C to 50 °C)
Power Requirements: AC Mains: 100-240 VAC, 50-60 Hz 1.4A max Input
Units: inches, mm or µsec
Communication: USB, Wi-Fi, Bluetooth, RS-232 (Optional)
Languages: English, French, Spanish, Italian, Portuguese, German, Slovak, Swedish, Russian, Chinese, Japanese, Czech, Finnish, Hungarian
Standard Inclusions: Digital Ultrasonic flaw detector with 7” color sunlight readable touch screen display including: 2 independent gates, DAC, AWS software, datalogger with B-Scan, Bluetooth, Wifi, enclosure includes protective rubber corners with built in stand and padded hand strap, microSD card, rechargeable Li-ion battery, AC adapter with power cord, USB-C cable, plastic carrying case, couplant, Data XL interface program to export saved readings to p.c. (Microsoft Excel), ASTM E317-15 calibration certificate
Certifications: CE certified, RHOS compliant, designed for IP67, ASTM E317-15 calibration certificate included with gage
Warranty: Limited 2 year warranty under normal use on parts and labor for gage. Optional Dan-A-Care to add up to 3 more years

Display
Display: 7” sunlight readable Multi-Touch display with Wide VGA (800x480 pixels)
Backlight: Light Emitting Diode (LED) backlight. Includes variable light intensity
Interface: Operate with multi- touch screen and/or keyboard - complete one-hand operation

Inputs/Outputs
USB Port: USB-C (Supports USB 2.0 On-The-Go (OTG), Power in to charge the unit, Display output)
RS-232 Port: Optional
Video Output: Wide VGA output via USB-C (Requires USB-C to HDMI cable)
Analog Output: 1 analog output (optional), Selectable 1 V/10 V Full Scale, 4mA max
Alarm Output: 3 alarm outputs, 5 V TTL, 10 mA
Trigger I/O: Trigger input, 5V TTL; Trigger output, 5V TTL, 10 mA max
Encoder Inputs: 2-axis encoder line
Charger Input: 12V DC, 5A
Transducer Connectors: Dual LEMO 00

Measurement
Transducer and Measurement Types: Single, dual, thru transmission, angle beam, delay lines, contact, immersion, echo to echo, dry couple
Measurement Rate: 10 Hz -2k Hz adjustable
Range: 0.353” to 277” (8.96 mm to 7035.8 mm) @ 5,900 m/s (0.2320 in./μ) Optional extended range 554” (14071.6mm)
Zoom: Zooms gate 1 width to minimum range capability
Display Delay: -0.018” to 276.647” (8.96 to 7035.8mm) @ longitudinal velocity in steel
Zero Offset: 0-2387 µsec.
Velocity: 0.0250”/µs to 0.6000”/µs (635 m/s to 15240 m/s)
Alarm: Dynamic change of color and vibrate on alarm for echo in gate, echo above DAC positive, DAC negative, gate, minimum depth alarm and polarity change (phase reversal)
Peak Hold: Holds curve of ECHO envelope with live echo. Peak on, Peak hold, Peak off, peak pitch memory (audible chirp based on maximum echo amplitude)
Freeze: Freezes for data storage and waveform viewing analysis - ideal for high temperature measurements
Waveform: Filled or outlined
Angle Beam: Displays all three leg components, angular distance, surface distance and depth (automatically displayed once an angle is entered) accounting for leg correction to correct for beam index point of wedge, fourth measurement box is gate 1 amplitude
Refracted Angle: 0° to 85° in 1° increments including 0, 30, 45, 60 and 70 as pre-set choices
Gate (1, 2): Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
Echo-to-Echo: Standard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurements: Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to Ref dB values
DAC/TCG: Standard
DAC points: Up to 50 points, 110 dB dynamic range
Special DAC modes: Custom DAC (up to 6 curves), 20-80% View
Curved surface correction (Optional): Standard OD or Bar correction for Angle Beam measurements
Curves: AVG/DGS
Corrosion Module (Optional): Zero-cross measurement algorithm, V-Path correction, Single or Echo-to-Echo, Encoded B-scan

Pulser
Pulser: Tunable Square Wave (1-25 MHz) or spike
Pulse Repetition Frequency(PRF): 10- 2000 Hz in 10 Hz increments
Pulser Voltage: 50V-600V in 5V increments.
Pulse Width: Adjustable from 20 ns to 2,000 ns (30MHz-0.5 MHz)
Damping: 50, 63, 150, 400 Ω

Receiver
Gain: 0-110db in (.1db increments for 0-100db)
Max Input Signal: 20 V p-p
Receiver Input Impedance: 400 Ω ± 5%
Receiver Bandwidth: 0.5 MHz to 25 MHz (-3 dB)
Filters: TBD
Rectification: RF, Full Wave, Half +, Half –, RF
Linearity: Per ASTM E317-15 (1% on vertical axis, .5% on horizontal axis)
Resolution: 1% FSH, amplifier accuracy ± 1dB
Reject: 0-80% FSH, completely linear with vertical indication bar
Amplitude Measurement: 0 to 110% full screen height with 1% resolution
Measurement Rate: Equivalent to PRF in all modes

Calibration
Automated Calibration: Velocity, Zero Offset, Straight Beam (First Backwall or Echo-to-Echo), Angle Beam (Soundpath or Depth)
Test Modes: Pulse Echo, Dual, or Through Transmission

Gates
Measurement Gates: 2 fully independent gates for amplitude and TOF measurements,Optional Interface gate
Gate Start:Variable over entire displayed range
GateWidth: Variable from Gate Start to end of displayed range
Gate Height: Variable from 2 to 95% full screen height
Alarms: Positive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)
Gate Options: Floating, tracking and interface

Datalogger
Datalogger: file types linear, 2D, 2D with custom point, 3D, 3D with custom point, boiler with and without waveform storage options.32 character file name and 20 character longer I.D. strings
Data storage: 100,000 IDs onboard, removable MicroSD card standard, expandable to 32Gb file types linear, 2D, 2D with custom point, 3D, 3D with custom point, boiler with and without waveform storage options. 32 character file name and 20 character longer I.D. strings
Stored Setups: Storage and recall of 2700 calibration and setup files
Data XL: Interface program to send and receive files to and from PC. Displays thickness with ID in Microsoft Excel

Hardware/Software
Software Options: Corrosion module, precision module, floating gate, tracking gate, interface gate, pipe curvature correction, backwall echo attenuator (BEA), extended range up to 554”
Hardware Options: Magnetic wheel encoder, RS-232, heavy duty bail, spare battery, external charger, foot switch, test blocks, cables, probes, couplant, and magnetic pipe stand, heavy duty Pelican case, chest harness



REQUEST A QUOTE
Floating Gate
Available as a software option for ECHO PRO

The floating gate option  allows the gate to float from -1 to -18db for gate 1 and 2.  Includes tracking gate and V-path correction when using select duals 
Floating Gate


Interface Gate
 Available as a software option for ECHO PRO

The interface gate option automatically detects the first interface echo while gates 1 and 2 can track from it or each other
Interface Gate


Back Echo Attenuator
Available as a software option for ECHO PRO


Back Echo Attenuator
REQUEST A QUOTE
EZ Scan 6 - Magnetic Wheel Encoder
Danatronics EZ Scan 6 encoder is a 1 axis encoder that keeps track of the transducer movement as it relates to the B-scan image. The ECHO 9 must contain the Datalogger Software for the B-scan to appear. This feature requires a hardware change to allow for the lemo encoder jack on the top of the gage.
EZ Scan 6 - Magnetic Wheel Encoder


Spring Loaded Holder
The spring loaded holder (SPH-718) is the ideal fixture to be used on small diameter applications such as tubing to prevent the probe from rocking. Shown above is the SPH-718 with the DK718 transducer inside. The probe can be rotated as well and the fixture has v-notches to assist in probe alignment.
Spring Loaded Holder


Chest harness
Custom 4 point chest harness with comfortable adjustment of straps for shoulder and waste line. Comes with metal detents
Chest harness


5 Step Test Block
We offer a 5 step test block, made of carbon steel with nickel plating engraved in both English and Metric values from .100’, .200”, .300”, .400”, .500” or 2.54mm, 5.05mm, 7.5mm, 10.0mm, 12.7mm (No certification is provided with these blocks but can be provide on special order for an additional fee)
5 Step Test Block


Cables
Dual and single cables offered in 6 feet or other lengths upon special order. Shown left to right: DLM-06, DLM-06ACMP, LM-06
Cables


Couplants
We offer a variety of ultrasonic couplants from a standard gel in 2 Oz. or 12 Oz. options, to high temperature up to 1100 Degrees F. Contact us for more details.
Couplants


Footswitch
With this hardware option the operator can use a footswitch to save, freeze or send readings.
Footswitch
REQUEST A QUOTE
Dual Transducers
Danatronics dual transducers are stocked in a wide variety of frequencies and diameters, from 0.5mHz to 10mHz. Most of our dual transducers come standard with a potted cable and molded plug. For our non-potted dual transducers that come with microdot connectors we offer both standard and armored cables
Dual Transducers


Single Element Contact Transducers
Danatronics single element transducers are stocked in a wide variety of frequencies and diameters, from 0.5mHz to 10mHz. All single element probes come standard with microdot connectors
Single Element Contact Transducers


Delay Line Transducers
Danatronics delay line transducer are available in 5, 10 and 20 mHZ options.
Delay Line Transducers


Angle Beam
Danatronics angle beam transducers are available as quick change angle beams or as AWS type probes with with snail or serrated wedges 
Angle Beam


High Temperature
The DHT-537 high temperature dual (up to 950F intermittent use) shown with optional Bell Housing and available armored Dual Lemo to Microdoct 6’ cable with molded plug (DLM-09ACMP)
High Temperature


Spring Loaded Holder
Available for DK718 

Danatronics Spring Loaded Holder has dual v-notches for small diameter pipes and tubes to prevent probe “rocking”
Spring Loaded Holder